OBDC • Duct suspension clamps

Suspension clamps for ducts

Diameter range from 80 mm up to 1000 mm

• Suspension of circular ducts
• Dia 80 up to 400 mm with screw M6 on either side, 1-point suspension with M8/M10 nut on top
• Dia 450 up to 800 mm with 2-point suspension with M10 hole on either side

• Made of hot dipped sendzimir zinc plated steel
• Maximum suspended weight of 500 kg
• Width is 20 mm for Dia 80 - 400 mm and 25 mm above Dia 400 mm
• Thickness is 1.8 mm under Dia 400 mm and 2.3 mm above Dia 400 mm

• Threaded rods, type THA (not included)

• Suspensions clamps with rubber inlay, type OBMC

• OBDC, 250

Explanation :

OBDC = Clamp type

250 = Diameter type

• The circular ducts shall be suspended by means of sendzimir zinc plated steel clamps. They shall tolerate a maximum suspended weight of 500 kg. The ducts shall be suspended on two points (as from Dia 450 mm) by means of threaded rods on either side of the clamp or with one point (until Dia 400 mm) on top of the clamp.
• ATC type OBDC